Kinetic theory of gases Energy

photo src: sitinstitute.org

The kinetic theory describes a gas as a large number of submicroscopic particles (atoms or molecules), all of which are in constant rapid motion that has randomness arising from their many collisions with each other and with the walls of the container.

Kinetic theory explains macroscopic properties of gases, such as pressure, temperature, viscosity, thermal conductivity, and volume, by considering their molecular composition and motion. The theory posits that gas pressure is due to the impacts, on the walls of a container, of molecules or atoms moving at different velocities.

Kinetic theory defines temperature in its own way, in contrast with the thermodynamic definition.

Under a microscope, the molecules making up a liquid are too small to be visible, but the jittery motion of pollen grains or dust particles can be seen. Known as Brownian motion, it results directly from collisions between the grains or particles and liquid molecules. As analyzed by Albert Einstein in 1907, this experimental evidence for kinetic theory is generally seen as having confirmed the concrete material existence of atoms and molecules.

photo src: peliculasyjuegos.tk

Maps, Directions, and Place Reviews

Assumptions

The theory for ideal gases makes the following assumptions:

• The gas consists of very small particles known as molecules. This smallness of their size is such that the total volume of the individual gas molecules added up is negligible compared to the volume of the smallest open ball containing all the molecules. This is equivalent to stating that the average distance separating the gas particles is large compared to their size.
• These particles have the same mass.
• The number of molecules is so large that statistical treatment can be applied.
• These molecules are in constant, random, and rapid motion.
• The rapidly moving particles constantly collide among themselves and with the walls of the container. All these collisions are perfectly elastic. This means, the molecules are considered to be perfectly spherical in shape, and elastic in nature.
• Except during collisions, the interactions among molecules are negligible. (That is, they exert no forces on one another.)

• The average kinetic energy of the gas particles depends only on the absolute temperature of the system. The kinetic theory has its own definition of temperature, not identical with the thermodynamic definition.
• The elapsed time of a collision between a molecule and the container's wall is negligible when compared to the time between successive collisions.
• Because they have mass, the gas molecules will be affected by gravity.

More modern developments relax these assumptions and are based on the Boltzmann equation. These can accurately describe the properties of dense gases, because they include the volume of the molecules. The necessary assumptions are the absence of quantum effects, molecular chaos and small gradients in bulk properties. Expansions to higher orders in the density are known as virial expansions.

An important book on kinetic theory is that by Chapman and Cowling. An important approach to the subject is called Chapman-Enskog theory. There have been many modern developments and there is an alternative approach developed by Grad based on moment expansions. In the other limit, for extremely rarefied gases, the gradients in bulk properties are not small compared to the mean free paths. This is known as the Knudsen regime and expansions can be performed in the Knudsen number.

Energy Gas Video

Properties

Pressure and kinetic energy

In kinetic model of gases the pressure is equal to the force exerted by the atoms hitting and rebounding from a unit area of the gas container surface. Consider a gas of N molecules, each of mass m, enclosed in a cuboid of volume V = L³. When a gas molecule collides with the wall of the container perpendicular to the x axis and bounces off in the opposite direction with the same speed (an elastic collision), the change in momentum is given by:

where p is the momentum, i and f indicate initial and final momentum (before and after collision), x indicates that only the x direction is being considered, and v is the speed of the particle (which is the same before and after the collision).

The particle impacts one specific side wall once every

where L is the distance between opposite walls.

The force due to this particle is

The total force on the wall is

where the bar denotes an average over the N particles.

Since the motion of the particles is random and there is no bias applied in any direction, the average squared speed in each direction is identical:

By Pythagorean theorem in three dimensions the total squared speed v is given by

Therefore:

and the force can be written as:

This force is exerted on an area L². Therefore, the pressure of the gas is

where V = L³ is the volume of the box.

In terms of the kinetic energy of the gas K:

This is a first non-trivial result of the kinetic theory because it relates pressure, a macroscopic property, to the (translational) kinetic energy of the molecules ${\displaystyle N{\frac {1}{2}}m{\overline {v^{2}}}}$, which is a microscopic property.

Temperature and kinetic energy

Rewriting the above result for the pressure as ${\displaystyle PV={Nm{\overline {v^{2}}} \over 3}}$, we may combine it with the ideal gas law

where ${\displaystyle \displaystyle k_{B}}$ is the Boltzmann constant and ${\displaystyle \displaystyle T}$ the absolute temperature defined by the ideal gas law, to obtain

which leads to simplified expression of the average kinetic energy per molecule,

The kinetic energy of the system is N times that of a molecule, namely ${\displaystyle K={\frac {1}{2}}Nm{\overline {v^{2}}}}$. Then the temperature ${\displaystyle \displaystyle T}$ takes the form

which becomes

Eq.(3) is one important result of the kinetic theory: The average molecular kinetic energy is proportional to the ideal gas law's absolute temperature. From Eq.(1) and Eq.(3), we have

Thus, the product of pressure and volume per mole is proportional to the average (translational) molecular kinetic energy.

Eq.(1) and Eq.(4) are called the "classical results", which could also be derived from statistical mechanics; for more details, see:

Since there are ${\displaystyle \displaystyle 3N}$ degrees of freedom in a monatomic-gas system with ${\displaystyle \displaystyle N}$ particles, the kinetic energy per degree of freedom per molecule is

In the kinetic energy per degree of freedom, the constant of proportionality of temperature is 1/2 times Boltzmann constant. In addition to this, the temperature will decrease when the pressure drops to a certain point. This result is related to the equipartition theorem.

As noted in the article on heat capacity, diatomic gases should have 7 degrees of freedom, but the lighter gases act as if they have only 5.

Thus the kinetic energy per kelvin (monatomic ideal gas) is:

• per mole: 12.47 J
• per molecule: 20.7 yJ = 129 ?eV.

At standard temperature (273.15 K), we get:

• per mole: 3406 J
• per molecule: 5.65 zJ = 35.2 meV.

Collisions with container

One can calculate the number of atomic or molecular collisions with a wall of a container per unit area per unit time.

Assuming an ideal gas, a derivation results in an equation for total number of collisions per unit time per area:

This quantity is also known as the "impingement rate" in vacuum physics.

Speed of molecules

From the kinetic energy formula it can be shown that

where v is in m/s, T is in kelvins, and m is the mass of one molecule of gas. The most probable (or mode) speed ${\displaystyle v_{\text{p}}}$ is 81.6% of the rms speed ${\displaystyle v_{\text{rms}}}$, and the mean (arithmetic mean, or average) speed ${\displaystyle {\bar {v}}}$ is 92.1% of the rms speed (isotropic distribution of speeds).

See:

• Average,
• Root-mean-square speed
• Arithmetic mean
• Mean
• Mode (statistics)

Transport properties

The kinetic theory of gases deals not only with gases in thermodynamic equilibrium, but also very importantly with gases not in thermodynamic equilibrium. This means considering what are known as "transport properties", such a viscosity and thermal conductivity.

photo src: www.bluesourceenergy.com

History

In approximately 50 BCE, the Roman philosopher Lucretius proposed that apparently static macroscopic bodies were composed on a small scale of rapidly moving atoms all bouncing off each other. This Epicurean atomistic point of view was rarely considered in the subsequent centuries, when Aristotlean ideas were dominant.

In 1738 Daniel Bernoulli published Hydrodynamica, which laid the basis for the kinetic theory of gases. In this work, Bernoulli posited the argument, still used to this day, that gases consist of great numbers of molecules moving in all directions, that their impact on a surface causes the gas pressure that we feel, and that what we experience as heat is simply the kinetic energy of their motion. The theory was not immediately accepted, in part because conservation of energy had not yet been established, and it was not obvious to physicists how the collisions between molecules could be perfectly elastic.

Other pioneers of the kinetic theory (which were neglected by their contemporaries) were Mikhail Lomonosov (1747), Georges-Louis Le Sage (ca. 1780, published 1818), John Herapath (1816) and John James Waterston (1843), which connected their research with the development of mechanical explanations of gravitation. In 1856 August Krönig (probably after reading a paper of Waterston) created a simple gas-kinetic model, which only considered the translational motion of the particles.

In 1857 Rudolf Clausius, according to his own words independently of Krönig, developed a similar, but much more sophisticated version of the theory which included translational and contrary to Krönig also rotational and vibrational molecular motions. In this same work he introduced the concept of mean free path of a particle. In 1859, after reading a paper on the diffusion of molecules by Rudolf Clausius, Scottish physicist James Clerk Maxwell formulated the Maxwell distribution of molecular velocities, which gave the proportion of molecules having a certain velocity in a specific range. This was the first-ever statistical law in physics. Maxwell also gave the first mechanical argument that molecular collisions entail an equalization of temperatures and hence a tendency towards equilibrium. In his 1873 thirteen page article 'Molecules', Maxwell states: "we are told that an 'atom' is a material point, invested and surrounded by 'potential forces' and that when 'flying molecules' strike against a solid body in constant succession it causes what is called pressure of air and other gases." In 1871, Ludwig Boltzmann generalized Maxwell's achievement and formulated the Maxwell-Boltzmann distribution. Also the logarithmic connection between entropy and probability was first stated by him.

In the beginning of the twentieth century, however, atoms were considered by many physicists to be purely hypothetical constructs, rather than real objects. An important turning point was Albert Einstein's (1905) and Marian Smoluchowski's (1906) papers on Brownian motion, which succeeded in making certain accurate quantitative predictions based on the kinetic theory.

Source of the article : Wikipedia