Geothermal energy in the United States

- 07.23

Uses Of Geothermal Energy In 2016
photo src: www.ralf-heiser.info


Geothermal Energy Uses | SIGMAPRESS
photo src: www.sigmapress.org


Maps, Directions, and Place Reviews



History

According to archaeological evidence, geothermal resources have been in use on the current territory of the United States for more than 10,000 years. The Paleo-Indians first used geothermal hot springs for warmth, cleansing, and minerals.

The first commercial geothermal power plant producing power to the U.S. utility grid opened at The Geysers in California in 1960, producing eleven megawatts of net power. The Geysers system continues to operate successfully today, and the complex has grown into the largest geothermal development in the world, with an output of 750 MW.


Uses Of Geothermal Energy Video



Plants

The largest dry steam field in the world is the Geysers, 116 km (72 mi) north of San Francisco. It was here that Pacific Gas and Electric began operation of the first successful geothermal electric power plant in the United States in 1960. The original turbine lasted for more than 30 years and produced 11 MW net power. The Geysers has 1517 megawatt (MW) of active installed capacity with an average capacity factor of 63%. Calpine Corporation owns 15 of the 18 active plants in the Geysers and is currently the United States' largest producer of geothermal energy. Two other plants are owned jointly by the Northern California Power Agency and the City of Santa Clara's municipal Electric Utility (now called Silicon Valley Power). The remaining Bottle Rock Power plant owned by the US Renewables Group has only recently been reopened. A nineteenth plant is now under development by Ram Power, formerly Western Geopower. Since the activities of one geothermal plant affects those nearby, the consolidation plant ownership at The Geysers has been beneficial because the plants operate cooperatively instead of in their own short-term interest. The Geysers is now recharged by injecting treated sewage effluent from the City of Santa Rosa and the Lake County sewage treatment plant. This sewage effluent used to be dumped into rivers and streams and is now piped to the geothermal field where it replenishes the steam produced for power generation.

Another major geothermal area is located in south central California, on the southeast side of the Salton Sea, near the cities of Niland and Calipatria, California. In 2001, there were 15 geothermal plants producing electricity in the area. CalEnergy owns about half of them and the rest are owned by various companies. Combined the plants have a capacity of about 570 MW. Hudson Ranch I geothermal plant, a 50 MW plant opened in May 2012, the first in the area in 20 years. A second similar plant is to open in 2013.

The Basin and Range geologic province in Nevada, southeastern Oregon, southwestern Idaho, Arizona and western Utah is now an area of rapid geothermal development. Several small power plants were built during the late 1980s during times of high power prices. Rising energy costs have spurred new development. Plants in Nevada at Steamboat Springs, Brady/Desert Peak, Dixie Valley, Soda Lake, Stillwater and Beowawe now produce about 235 MW.

By state

Installed geothermal capacity in megawatts (MW) by state as of February 2013:


What is Geothermal? - Geothermal Resources Council
photo src: geothermal.org


Production and development

With 3,040.27 MW of installed geothermal capacity, the United States remains the world leader with 30% of the online capacity total. The future outlook for expanded production from conventional and enhanced geothermal systems is positive as new technologies promise increased growth in locations previously not considered.

As of August 2008, 103 new projects are under way in 13 U.S. states. When developed, these projects could potentially supply up to 3,979 MW of power, meeting the needs of about 4 million homes. At this rate of development, geothermal production in the United States could exceed 15,000 MW by 2025.

The most significant catalyst behind new industry activity is the Energy Policy Act of 2005. This Act made new geothermal plants eligible for the full federal production tax credit, previously available only to wind power projects and certain kinds of biomass. It also authorized and directed increased funding for research by the Department of Energy, and enabled the Bureau of Land Management to address its backlog of geothermal leases and permits.

In April 2008, exploratory drilling began at Newberry Volcano in Oregon.

In 2009, investment bank Credit Suisse calculated that geothermal power costs 3.6 cents per kilowatt-hour, versus 5.5 cents per kilowatt-hour for coal, if geothermal receives loans with lower rates than offered by the market."


Energy usage per person accross the world. [5409x2834] : MapPorn
photo src: www.reddit.com


Reliability

Unlike some other renewable power sources such as wind and solar, geothermal energy is dispatchable, meaning that it is both available whenever needed, and can quickly adjust output to match demand. According to the US Energy Information Administration (EIA), of all types of new electrical generation plants, geothermal generators have the highest capacity factor, a measure of how much power a facility actually generates as a percent of its maximum capacity. The EIA rates new geothermal plants as having a 92% capacity factor, comparable to those of nuclear (90%), and higher than gas (87%), or coal (85%), and much higher than those of intermittent sources such as onshore wind (34%) or solar photovoltaic (25%). While the carrier medium for geothermal electricity (water) must be properly managed, the source of geothermal energy, the Earth's heat, will be available, for most intents and purposes, indefinitely.

In 2008 the USDOE funded research in Enhanced Geothermal Systems (EGS) to learn more about the fracture systems in geothermal reservoirs and better predict the results of reservoir stimulation. The DOE Geothermal Technologies Program (part of the American Recovery and Reinvestment Act of 2009) provided funding to establish the National Geothermal Data System (NGDS). Through the NGDS, many older paper archives and drill logs that are stored at state geological surveys are now being digitized and made available for free to the public.


Geothermal Electricity | Center for Climate and Energy Solutions
photo src: www.c2es.org


Environmental effects

The underground hot water and steam used to generate geothermal power may contain chemicals that could pollute the air and water if released at the surface.

Hydrogen sulfide, which is toxic in high concentrations, is sometimes found in geothermal systems. Newer methods of generating geothermal power separate the hot steam collected underground from the steam used to power turbines, and substantially reduce the risk of releasing air-polluting contaminants.

The water mixed with the steam contains dissolved salts that can damage pipes and harm aquatic ecosystems. Some subsurface water associated with geothermal sources contain high concentrations of toxic elements such as boron, lead, and arsenic.

Injection of water in enhanced geothermal systems may cause induced seismicity. Earthquakes at the Geysers geothermal field in California, the largest being Richter magnitude 4.6, have been linked to injected water.

"Possible effects include scenery spoliation, drying out of hot springs, soil erosion, noise pollution, and chemical pollution of the atmosphere and of surface- and groundwaters."

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search